DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| RR Door Courtesy SW | Rear door courtesy light switch RH and LH signal / ON or OFF | ON: Rear door RH or LH open OFF: Rear door RH and LH closed |
- |
| RL Door Courtesy SW | Rear door courtesy light switch RH and LH signal / ON or OFF | ON: Rear door RH or LH open OFF: Rear door RH and LH closed |
- |
| FR Door Lock Pos | Front door RH unlock detection switch signal / LOCK or UNLOCK | LOCK: Front door RH locked UNLOCK: Front door RH unlocked |
- |
| FR Door Courtesy SW | Front door courtesy light switch RH signal / ON or OFF | ON: Front door RH open OFF: Front door RH closed |
- |
| FL Door Lock Pos | Front door LH unlock detection switch signal / LOCK or UNLOCK | LOCK: Front door LH locked UNLOCK: Front door LH unlocked |
- |
| FL Door Courtesy SW | Front door courtesy light switch LH signal / ON or OFF | ON: Front door LH open OFF: Front door LH closed |
- |
| RR-Door Lock Pos SW | Rear door RH and LH unlock detection switch signal / ON or OFF | ON: Rear door RH or LH unlocked OFF: Rear door RH and LH locked |
- |
| RL-Door Lock Pos SW | Rear door RH and LH unlock detection switch signal / ON or OFF | ON: Rear door RH or LH unlocked OFF: Rear door RH and LH locked |
- |
| Wireless Control | Wireless door lock control function / ON or OFF | Customized value displayed | - |
| Hazard Answer Back | Hazard answer-back of wireless / ON or OFF | Customized value displayed | - |
| Open Door Warning | Open door warning / ON or OFF | Customized value displayed | - |
| Panic Function*1 | Panic function / ON or OFF | Customized value displayed | - |
| Auto Lock Time | Automatic lock time / 120 s, 60 s or 30 s | Customized value displayed | - |
| Wireless Buzzer Resp*2 | Buzzer answer-back of wireless / ON or OFF | Customized value displayed | - |
| Wireless Buzzer Vol | Wireless door lock buzzer volume / Level 7, Level 6, Level 5, Level 4, Level 3, Level 2, Level 1 or Level 0 | Customized value displayed | - |
*1: w/ Panic Function
*2: w/ Wireless Buzzer Answer Back Function
ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing the Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Illuminated Entry System | Interior lights (Interior light switch is in door position and all doors are closed) | OFF/ON | - |
| Wireless Buzzer | Wireless door lock buzzer | OFF/ON | - |