POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM Tilt and Telescopic Manual Switch Circuit
| DTC Code | DTC Name |
|---|---|
| Tilt and Telescopic Manual Switch Circuit |
DESCRIPTION
The signals generated by operating the tilt and telescopic switch are sent to the multiplex tilt and telescopic ECU through the serial line.
PROCEDURE
READ VALUE USING INTELLIGENT TESTER (TILT UP/DOWN SWITCH, TELESCO SHORT/LONG SWITCH)
Use the Data List to check if the tilt and telescopic switch is functioning properly.
Body Electrical > Tilt&Telescopic > Data List
Tester Display
Measurement Item
Range
Normal Condition
Diagnostic Note
Tilt Up Switch
Input state of tilt up by manual switch
ON or OFF
ON: Tilt up activated by manual switch
OFF: Tilt up not activated by manual switch
-
Tilt Down Switch
Input state of tilt down by manual switch
ON or OFF
ON: Tilt down activated by manual switch
OFF: Tilt down not activated by manual switch
-
Telesco Short Switch
Input state of telescopic short by manual switch
ON or OFF
ON: Telescopic short activated by manual switch
OFF: Telescopic short not activated by manual switch
-
Telesco Long Switch
Input state of telescopic long by manual switch
ON or OFF
ON: Telescopic long activated by manual switch
OFF: Telescopic long not activated by manual switch
-
OK
"ON" is displayed on the intelligent tester screen for each switch that is turned on.
"OFF" is displayed on the intelligent tester screen for each switch that is turned off.
Result
Result
OK
NG