LOAD SENSING PROPORTIONING VALVE (w/o VSC) DISASSEMBLY


  1. REMOVE REAR FLEXIBLE HOSE BRACKET

    A01DW45

    1. Remove the 2 nuts.

    2. Remove the bracket and valve set plate from the valve.

  2. REMOVE LOAD SENSING VALVE BRACKET

    A01E2RI

    1. Remove the bolt, nut and 2 washers.

    2. Remove the bracket from the valve.

  3. REMOVE LOAD SENSING SPRING ASSEMBLY

    A01DW0Q

    1. Using pliers, remove the clip and spring from the valve body.

  4. REMOVE NO. 1 AND NO. 2 SHACKLES


    1. Remove the bolt, nut and 2 plate washers.

    2. Remove the No. 1 shackle (with No. 2 shackle) from the spring.

    3. Loosen the lock nut.

    4. Remove the adjusting nut and No. 2 shackle from the No. 1 shackle.

  5. REMOVE LOAD SENSING SPRING

    A01E12Q

    1. Remove the 4 bushes, 2 collars and 2 rubber plates from the spring.

    2. Remove the valve boot and spring boot from the spring.