FRONT DRIVE SHAFT ASSEMBLY(for 1ND-TV) INSPECTION

PROCEDURE

  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY

    1. C211744

      Check that there is no excessive play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial direction of the inboard joint.

    4. Check the boots for damage.

    5. C157783N21

      Check whether each drive shaft dimension (A) is within specification.

      Note:

      Keep the drive shaft assembly level during inspection.

      Dimension (A)

      Dimension (A)

      LH Side

      590.4 mm (1.94 ft.)

      RH Side

      869.25 mm (2.85 ft.)