BLACK OUT TAPE(for Front Door) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. REMOVE DECK BOARD ASSEMBLY

    Click here

  3. REMOVE NO. 1 DECK BOARD

    Click here

  4. REMOVE NO. 2 DECK BOARD

    Click here

  5. REMOVE REAR DECK FLOOR BOX

    Click here

  6. REMOVE DECK FLOOR BOX RH

    Click here

  7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  9. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  10. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  11. REMOVE DOOR ARMREST COVER

    Click here

  12. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  13. REMOVE FRONT DOOR TRIM BRACKET

    Click here

  14. REMOVE FRONT DOOR SERVICE HOLE COVER

    Click here

  15. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  16. REMOVE FRONT DOOR GLASS RUN

    Click here

  17. REMOVE FRONT DOOR BELT MOULDING ASSEMBLY

    Click here

  18. REMOVE FRONT DOOR REAR WINDOW FRAME MOULDING

    Click here

  19. REMOVE DOOR FRAME GARNISH

    Click here

  20. DISCONNECT FRONT DOOR WEATHERSTRIP


    1. A005C5N

      Using a clip remover, disengage the 2 clips and remove the upper part of the front door weatherstrip to the extent that allows removal of the front door strip and black out tape.

  21. REMOVE NO. 1 BLACK OUT TAPE


    1. Using a heat light, heat the No. 1 black out tape and vehicle body.

      Heating Temperature
      Item Temperature
      Vehicle Body 40 to 60°C (104 to 140°F)

      Note

      Do not heat the vehicle body excessively.

    2. A005B86

      Pull back on one of the ends of the No. 1 black out tape to remove it.

      Tech Tips

      When pulling on the tape, pull it parallel to the body.

  22. REMOVE FRONT DOOR STRIPE


    1. Using a heat light, heat the front door stripe and vehicle body.

      Heating Temperature
      Item Temperature
      Vehicle Body 40 to 60°C (104 to 140°F)

      Note

      Do not heat the vehicle body excessively.

    2. A005ELQ

      Pull back on one of the ends of the front door stripe to remove it.

      Tech Tips

      When pulling on the stripe, pull it parallel to the body.

  23. REMOVE FRONT DOOR LOWER OUTSIDE STRIPE


    1. Using a heat light, heat the front door lower outside stripe and vehicle body.

      Heating Temperature
      Item Temperature
      Vehicle Body 40 to 60°C (104 to 140°F)

      Note

      Do not heat the vehicle body excessively.

    2. A0059UU

      Pull back on one of the ends of the front door lower outside stripe to remove it.

      Tech Tips

      When pulling on the stripe, pull it parallel to the body.

  24. REMOVE FRONT DOOR REAR OUTSIDE STRIPE


    1. Using a heat light, heat the front door rear outside stripe and vehicle body.

      Heating Temperature
      Item Temperature
      Vehicle Body 40 to 60°C (104 to 140°F)

      Note

      Do not heat the vehicle body excessively.

    2. A005CIM

      Pull back on one of the ends of the front door rear outside stripe to remove it.

      Tech Tips

      When pulling on the stripe, pull it parallel to the body.