CONDENSER REMOVAL

PROCEDURE

1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

   for HFC-134a (R134a):

   Click here

   for HFO-1234yf (R1234yf):

   Click here

2. REMOVE THERMISTOR ASSEMBLY

   Click here

3. REMOVE FRONT UPPER BUMPER SUPPORT

   Click here

4. REMOVE NO. 1 RADIATOR SIDE AIR SEAL

   1. 

      Remove the clip.

   2. Disengage the 2 claws and remove No. 1 radiator side air seal.

5. REMOVE NO. 2 RADIATOR SIDE AIR SEAL

   1. 

      Disengage the 3 claws and remove No. 2 radiator side air seal.

6. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

   1. 

      Remove the bolt and disconnect the discharge hose sub-assembly from the cooler condenser assembly.

   2. Remove the 2 O-rings from the discharge hose sub-assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

7. DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY

   1. 

      Remove the bolt and disconnect the air conditioner tube and accessory assembly from the cooler condenser assembly.

   2. Remove the 2 O-rings from the air conditioner tube and accessory assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

8. REMOVE COOLER CONDENSER ASSEMBLY

   1. 

      Remove the 2 bolts from the cooler condenser assembly.

   2. Disengage the 2 guides and remove the cooler condenser assembly as shown in the illustration.

      Note:

      Do not damage the condenser or radiator when removing the cooler condenser assembly.