STEERING COLUMN ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

Note


  • Do not drop the steering lock actuator or upper bracket assembly, strike it with tools or subject it toimpacts.

  • If the steering lock actuator or upper bracket assembly is subjected to an impact, replace it with a newone.

PROCEDURE


  1. REMOVE STEERING LOCK ACTUATOR OR UPPER BRACKET ASSEMBLY


    1. Secure the steering column assembly in a vise between aluminum plates.

      Note


      • Do not overtighten the vise.

      • Do not clamp the steering lock actuator or upper bracket assembly in the vise.

    2. B005V3FN01

      Using SST, strike a punch mark for drilling in the center of the steering lock set bolt.

      SST
      09622-00010

      Note

      When striking the punch mark, in order to prevent impact force from being applied to the steering lock actuator or upper bracket assembly, do not use a normal center punch.

    3. Using a drill, drill a hole in each steering lock set bolt and insert a screw extractor.

    4. B005QPZ

      Using the screw extractor, remove the 2 steering lock set bolts and steering lock actuator or upper bracket assembly.

      Note

      Push in the screw extractor by hand, and do not strike it with tools, etc.

  2. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU


    1. B005UED

      Disengage the 2 claws and guide to remove the multiplex tilt and telescopic ECU from the steering column assembly.