CHARGING SYSTEM

PROCEDURE

1. VEHICLE BROUGHT TO WORKSHOP

   Result

   Proceed to
   NEXT

   NEXT

2. CONFIRM PROBLEM SYMPTOMS

   Result

   Proceed to
   NEXT

   NEXT

3. CUSTOMER PROBLEM ANALYSIS

   1. Check if the vehicle has been jump started due to a discharged auxiliary battery.

   Result

   Result	Proceed to
   The vehicle has never been jump started.	A
   The vehicle has been jump started due to a discharged auxiliary battery.	B

   B

   GO TO ON-VEHICLE INSPECTION / CHECK AUXILIARY BATTERY VOLTAGE

   Click here

   A

4. CAN COMMUNICATION SYSTEM CHECK

   1. Using the Techstream, display the CAN Bus Check screen and check that all ECUs and sensors that are connected to the CAN communication system are displayed on the screen.

   Result

   Proceed to
   OK
   NG

   NG

   GO TO CAN COMMUNICATION SYSTEM

   Click here

   OK

5. CHECK FOR DTCS

   Result

   Result	Proceed to
   DTCs are not output	A
   DTCs are output	B

   B

   GO TO DTC CHART

   A

6. ON-VEHICLE INSPECTION

   Result

   Result	Proceed to
   Malfunctioning area has not been determined	A
   Malfunctioning area has been determined	B

   B

   REPAIR OR REPLACEClick here

   A

7. CHECK FOR INTERMITTENT PROBLEMS

   Result

   Proceed to
   NEXT

   NEXT

8. REPAIR OR REPLACE

   Result

   Proceed to
   NEXT

   NEXT

   END