TELEMATICS SYSTEM(w/ Telematics Transceiver) REGISTRATION
PROCEDURE
VEHICLE CONTRACT SETTING
Tip:When replacing the multi-media module receiver assembly, it is not necessary to cancel the G-BOOK contract. (If canceled, a new G-BOOK contract needs to be created after replacement.)
If the multi-media module receiver assembly or telematics transceiver (Data Communication Module [DCM]) is replaced on vehicles that do not have a contract for the G-BOOK, perform the vehicle contract setting.
If the multi-media module receiver assembly or telematics transceiver (Data Communication Module [DCM]) is replaced on vehicles that have a contract for the G-BOOK, perform the vehicle contract setting and the procedure to resume the G-BOOK and to start the emergency call service.
Check the ID before replacement (when diagnosis can be activated).
Tip:If the multi-media module receiver assembly is replaced, check the G-BOOK ID.
If the telematics transceiver (Data Communication Module [DCM]) is replaced, check the DCM ID.
Enter diagnostic mode.
-
Select "Service Information" on the "Service Menu" screen.
-
Select "G-BOOK Info for Contract" on the "Service Information" screen.
-
Check the G-BOOK ID or DCM ID.
Tip:The DCM ID is also specified on the telematics transceiver (Data Communication Module [DCM]) label.
Replace the multi-media module receiver assembly or telematics transceiver (Data Communication Module [DCM]).
Replace the multi-media module receiver assembly or telematics transceiver (Data Communication Module [DCM]) at a dealership.
Check the ID after replacement.
Tip:If the multi-media module receiver assembly is replaced, check the G-BOOK ID.
If the telematics transceiver (Data Communication Module [DCM]) is replaced, check the DCM ID.
Enter diagnostic mode.
-
Select "Service Information" on the "Service Menu" screen.
-
Select "G-BOOK Info for Contract" on the "Service Information" screen.
-
Check the G-BOOK ID or DCM ID.
Tip:The DCM ID is also specified on the telematics transceiver (Data Communication Module [DCM]) label.
Fill-in the Vehicle Contract Setting Request Form.
After filling in the Vehicle Contract Setting Request Form, fax it to the G-BOOK center.
Item
Information to Enter
Note
*1
Enter the dealership name.
Dealership information
*2
Enter the name of the applicant.
Applicant information
*3
Enter the fax number of the dealership.
Dealership information
*4
Enter the phone number of the dealership.
Dealership information
*5
Enter the VIN of the vehicle.
Vehicle information
*6
Enter the G-BOOK ID of the old unit.
Left-align the number.
If the multi-media module receiver assembly has not been replaced, it is not necessary to enter this item.
Used as change-request information from the dealership
*7
Enter the DCM ID of the old unit.
Left-align the number.
If the telematics transceiver (Data Communication Module [DCM]) has not been replaced, it is not necessary to enter this item.
Used as change-request information from the dealership
*8
Enter the G-BOOK ID of the new unit installed to the vehicle.
Left-align the number.
If the multi-media module receiver assembly has not been replaced, it is not necessary to enter this item.
Used as change-request information from the dealership
*9
Enter the DCM ID of the new unit installed to the vehicle.
Left-align the number.
If the telematics transceiver (Data Communication Module [DCM]) has not been replaced, it is not necessary to enter this item.
Used as change-request information from the dealership
*10
Enter the date when the telematics transceiver (Data Communication Module [DCM]) is replaced.
If the telematics transceiver (Data Communication Module [DCM]) has not been replaced, it is not necessary to enter this item.
Used as change-request information from the dealership
*11
Enter the mileage on the odometer when the multi-media module receiver assembly is replaced.
Used as change-request information from the dealership
*12
Enter the date that the mileage was recorded.
Used as change-request information from the dealership
Perform the procedure to resume the G-BOOK.
Select G-BOOK.com.
After the guidance screen is displayed, perform the procedure to resume the G-BOOK by following the instructions on the screen.
Perform the procedure to start the emergency call service.
After completing the procedure to resume the G-BOOK, perform the procedure to start the emergency call service by following the instructions on the screen.
Tip:The emergency call service will be available when the procedure is completed successfully.