SECURITY INDICATOR LIGHT ASSEMBLY INSPECTION


  1. INSPECT SECURITY INDICATOR LIGHT ASSEMBLY

    A01DXXP

    1. Apply battery voltage between the terminals of the indicator, and check the illumination of the security indicator light.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2

      Battery negative (-) → Terminal 1

      Illuminates

      Note


      • If the positive (+) lead and the negative (-) lead are incorrectly connected, the security indicator light will not illuminate.

      • If the voltage is too low, the security indicator light will not illuminate.

      If the result is not as specified, replace the light assembly.