ULTRASONIC SENSOR(for Rear) REMOVAL

PROCEDURE

  1. REMOVE REAR BUMPER COVER

    Click hereClick here

  2. REMOVE ULTRASONIC SENSOR CLIP

    Tip:

    • The illustration shows the ultrasonic sensor clip for the RH. The horizontal orientation of the ultrasonic sensor clip for the LH is opposite that of the image shown in the illustration.

    • Use the same procedure for both ultrasonic sensor clips.

    1. B428476

      Detach the 2 claws and remove the ultrasonic sensor clip as shown in the illustration.

    2. Detach the clamp.

  3. REMOVE NO. 2 ULTRASONIC SENSOR

    1. Disconnect the 4 connectors.

      B421021

    2. Detach the 4 claws and remove the No. 2 ultrasonic sensor as shown in the illustration.

      B354819
      Tip:

      • The illustration shows the No. 2 ultrasonic sensor for the LH corner and back sensor RH. The horizontal orientation of the No. 2 ultrasonic sensor for the RH corner and back sensor LH is opposite that of the image shown in the illustration.

      • Use the same procedure for all No. 2 ultrasonic sensors.