HEATED OXYGEN SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT SUSPENSION MEMBER BRACE

    Click here

  2. REMOVE NO. 2 ENGINE UNDER COVER

    Click here

  3. REMOVE HEATED OXYGEN SENSOR


    1. A01ODBM

      Disconnect the heated oxygen sensor connector.

    2. Disengage the wire harness clamp.

    3. A01OBCRN01

      Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

      SST
      09224-00011

      Note

      If the heated oxygen sensor has been struck or dropped, replace it.