SMART ENTRY AND START SYSTEM


  1. CONSTRUCTION


    1. Combination Meter Assembly


      1. When the certification ECU (smart key ECU assembly) detects an abnormality with the smart entry and start system, a message appears on the multi-information display. If the engine is stopped in this state, it might not be possible to restart it.

        B00233JC01
        *A Models with 4.2 Inch Multi-information Display *B Models with 7 Inch Multi-information Display
        *1 Combination Meter Assembly - -
        *a Multi-information Display *b Power Source State (ACC)
        *c Power Source State (IG) *d Key Warning
        Multi-information Display
        Displayed Item Power Source Condition
        -

        Either of the following conditions is met:


        • The engine has started.

        • The power source is turned off.
        ACCESSORY On (ACC) state
        IGNITION ON On (IG) state (the engine is not started.)
        Key Warning Engine start ready state*

        *: The shift lever is in P, the key certification result is OK and the brake pedal is depressed (the stop light switch assembly is on).