STEERING ANGLE SENSOR INSTALLATION

PROCEDURE

1. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

   
   

   1. Install the spiral cable with sensor sub-assembly Click here.

      Note

      
      

      • Do not replace the spiral cable with sensor sub-assembly with the negative (-) auxiliary battery cable connected and the power switch on (IG).

      • Do not rotate the spiral cable with sensor sub-assembly without the steering wheel with the negative (-) auxiliary battery cable connected and the power switch on (IG).

      • Ensure that the steering wheel is installed and aligned straight when inspecting the steering angle sensor.

      • Do not remove the steering angle sensor from the spiral cable.

2. INSTALL STEERING COLUMN COVER

   Click here

3. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD

4. ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

   Click here

5. INSTALL STEERING WHEEL ASSEMBLY

   Click here