TIRE PRESSURE WARNING RECEIVER INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

   1. Install the tire pressure warning ECU and receiver with the bolt.

      8.3 N*m

      85 kgf*cm

      73 in.*lbf

   2. Connect the connector.

2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

   Click here

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

4. INSTALL BATTERY SERVICE COVER

   Click here

5. INSTALL DECK BOARD ASSEMBLY

   Click here

6. REGISTER TRANSMITTER ID

   Click here

7. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here

8. PERFORM INITIALIZATION

   Click hereClick here