GLOW PLUG REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  3. REMOVE NO. 1 ENGINE COVER

    Click here

  4. DISCONNECT ENGINE WIRE

    1. A316913

      Using a T25 "TORX" socket wrench, remove the screw and disconnect the engine wire so that the glow plug assemblies can be removed in a later step.

  5. REMOVE GLOW PLUG ASSEMBLY

    1. Disconnect the 4 connectors from the glow plug assemblies.

    2. A316914E02

      Using SST, remove the 4 glow plug assemblies.

      SST

      PZ4TB-04910-68