POWER STEERING OIL PRESSURE SWITCH REMOVAL

PROCEDURE


  1. DRAIN POWER STEERING FLUID

  2. REMOVE POWER STEERING OIL PRESSURE SWITCH

    A01SBNDC01
    *A for 2WD
    *B for 4WD
    *1 Union Bolt
    *a Hold

    1. Disconnect the power steering oil pressure switch connector.

    2. for 2WD:


      1. Remove the power steering oil pressure switch.

    3. for 4WD:


      1. Using a wrench to hold union bolt.

    4. Remove the power steering oil pressure switch.

    5. Remove the O-ring from the power steering oil pressure switch.