VEHICLE STABILITY CONTROL SYSTEM, Diagnostic DTC:C1224
| DTC Code | DTC Name |
|---|---|
| C1224 | NE Signal |
DESCRIPTION
The skid control ECU (brake actuator assembly) receives engine speed signals from the ECM via CAN communication.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
C1224 |
NE Signal |
The vehicle speed is 6 km/h (4 mph) or more, the +BS terminal voltage is between 9.6 and 16.5 V, and the engine speed signal is more than 12800 rpm for 2.5 seconds or more. |
|
PROCEDURE
CHECK CAN COMMUNICATION SYSTEM
Check if CAN communication system DTCs are output.
Result
Result
Proceed to
DTCs are not output.
A
DTCs are output.
B
CHECK SFI SYSTEM
Check if SFI system DTCs are output.
for 1ND-TV (w/ Glow Plug Controller):Click here
for 1ND-TV (w/o Glow Plug Controller):Click here
for 1NR-FE:Click here
for 8NR-FTS:Click here
for 1ZR-FAE:Click here
for 1ZR-FE:Click here
for 2ZR-FE:Click here
for 1WW:Click here
Powertrain > Engine and ECT > Trouble Codes
Result
Result
Proceed to
DTCs are not output. (for 1ND-TV (w/ Glow Plug Controller)
A
DTCs are not output. (for 1ND-TV (w/o Glow Plug Controller)
B
DTCs are not output. (for 1NR-FE)
C
DTCs are not output. (for 8NR-FTS)
D
DTCs are not output. (for 1ZR-FAE)
E
DTCs are not output. (for 1ZR-FE)
F
DTCs are not output. (for 2ZR-FE)
G
DTCs are not output. (for 1WW)
H
DTCs are output. (for 1ND-TV (w/ Glow Plug Controller))
I
DTCs are output. (for 1ND-TV (w/o Glow Plug Controller))
J
DTCs are output. (for 1NR-FE)
K
DTCs are output. (for 8NR-FTS)
L
DTCs are output. (for 1ZR-FAE)
M
DTCs are output. (for 1ZR-FE)
N
DTCs are output. (for 2ZR-FE)
O
DTCs are output. (for 1WW)
P