GLOW PLUG CONTROLLER INSTALLATION

PROCEDURE

1. INSTALL GLOW PLUG CONTROLLER ASSEMBLY

   1. 

      *1	Guide
      	Install in this Direction

      Using a T25 "TORX" socket wrench, install the glow plug controller assembly with the bolt as shown in the illustration.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

   2. Connect the 2 glow plug controller assembly connectors.

2. INSTALL NO. 1 ENGINE COVER

   Click hereClick here

3. CONNECT CABLE TO BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick here