HEATED STEERING WHEEL CONTROLLER INSTALLATION

PROCEDURE

1. INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY

   1. Install the controller with the 2 screws.

   2. Connect the 2 connectors.

2. INSTALL STEERING PAD ASSEMBLY

   Click here

3. INSTALL NO. 2 STEERING WHEEL LOWER COVER

   Click here

4. INSTALL NO. 3 STEERING WHEEL LOWER COVER

   Click here

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

6. CHECK SRS WARNING LIGHT

   1. Inspect the SRS warning light (Click hereClick here).