BACK DOOR OPENER SWITCH INSPECTION

PROCEDURE

1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY

   1. Check the operation of the back door opener switch.

      1. 

         *a	Component without harness connected (Back Door Opener Switch Assembly)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance

         Tester Connection	Condition	Specified Condition
         2 (E) - 3 (UL)	Back door opener switch not pushed	10 kΩ or higher
         2 (E) - 3 (UL)	Back door opener switch pushed	Below 1 Ω

         If the result is not specified, replace the back door opener switch assembly.

   2. Check operation of the back door lock switch.

      1. 

         *a	Component without harness connected (Back Door Opener Switch Assembly)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance

         Tester Connection	Condition	Specified Condition
         1 (L) - 2 (E)	Back door lock switch not pushed	10 kΩ or higher
         1 (L) - 2 (E)	Back door lock switch pushed	Below 1 Ω

         If the result is not specified, replace the back door opener switch assembly.