FRONT BRAKE FLEXIBLE HOSE REMOVAL

CAUTION / NOTICE / HINT

Note:

If both left and right front flexible hoses are disconnected at the same time, be sure to place an identification mark on each hose to indicate its installation position.

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE

  1. REMOVE FRONT WHEEL

    Click here

  2. DRAIN BRAKE FLUID

    Note:

    If brake fluid leaks onto any painted surface, immediately wash it off.

  3. DISCONNECT FRONT FLEXIBLE HOSE

    1. C302504

      Remove the union bolt and gasket, and disconnect the front flexible hose from the front disc brake cylinder assembly.

  4. REMOVE FRONT FLEXIBLE HOSE

    1. C302525

      Using a union nut wrench, disconnect the brake line while holding the front flexible hose with a wrench.

      Note:

      • Do not kink or damage the brake line.

      • Do not allow any foreign matter such as dirt or dust to enter the brake line from the connecting parts.

    2. Remove the clip.

    3. C302524

      Remove the bolt and front flexible hose from the front shock absorber bracket.