KICK SENSOR INSTALLATION

PROCEDURE

  1. INSTALL KICK DOOR CONTROL SENSOR

    1. B454438C01

      *a

      Clamp

      *b

      Guide

      Insert the 2 guides as indicated by the arrows in the order shown in the illustration.

    2. Attach the 2 claws.

    3. Attach the 2 clamps.

    4. Connect the connector.

    5. B454439C01

      *a

      Antenna Upper

      *b

      Antenna Lower

      Attach the 10 claws in the order shown in the illustration to install the kick door control sensor.

      Note:

      • Install the kick door control sensor so that antenna line does not protrude from the groove.

      • Make sure that the antenna line does not cross over the edge of the connector.

  2. INSTALL REAR BUMPER COVER

    Click here

  3. CHECK TOUCHLESS POWER BACK DOOR OPENING OPERATION

    Click here