DIESEL THROTTLE BODY ON-VEHICLE INSPECTION

PROCEDURE

1. CHECK DIESEL THROTTLE BODY ASSEMBLY

   
   

   1. Connect the intelligent tester to the DLC3.

   2. Turn the ignition switch to ON.

   3. Turn the intelligent tester on.

   4. Enter the following menus: Powertrain / Engine and ECT / Active Test / Diesel Throttle Target Angle / Diesel Throttle / Target Throttle Position and Actual Throttle Position.

   5. Adjust "Diesel Throttle Target Angle" and check that "Actual Throttle Position" changes according to "Target Throttle Position".

      OK
      "Actual Throttle Position" changes according to "Target Throttle Position".