INSTRUMENT PANEL SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for 10 Speakers)


    1. A004OND

      Install the speaker with the 2 screws.

      Note

      Do not touch the cone part of the speaker.

    2. Attach the clamp.

  2. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY (for 10 Speakers)


    1. Install the upper instrument panel Click here.

  3. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for 6 Speakers)


    1. A004MLD

      Attach the 3 claws to install the front No. 2 speaker.

      Note

      Do not touch the cone part of the speaker.

  4. INSTALL NO. 2 INSTRUMENT PANEL SPEAKERPANEL SUB-ASSEMBLY (for 6 Speakers)


    1. A004QFG

      Connect the speaker connector

    2. A004NLW

      Set the 2 claws on the side of the speaker panel towards the front of the vehicle in place and using them as pivot points, lower the panel in the direction indicated by the arrow in the illustration, and then attach the claws and clips to the instrument panel to install the speaker panel.

  5. INSTALL FRONT PILLAR GARNISH LH (for 6 Speakers)

    Click here

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.