FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE FAN AND GENERATOR V BELT

    Click here

  2. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  3. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH

    Click here

  4. REMOVE CRANKSHAFT PULLEY ASSEMBLY

    Click here

  5. REMOVE TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL


    1. B008HA1C01
      *a Protective Tape

      Using a screwdriver, pry out the timing gear case or timing chain case oil seal.

      Note


      • Do not damage the surface of the press fit hole or crankshaft.

      • After removing the timing chain cover oil seal, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.