REAR COMBINATION LIGHT ASSEMBLY(for Sedan) REASSEMBLY

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE

  1. INSTALL REAR COMBINATION LIGHT LENS AND BODY

  2. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY (for LED Type)

    1. E349548

      Connect the connector.

    2. Engage the clamp to install the rear combination light socket and wire sub-assembly.

  3. INSTALL REAR COMBINATION LIGHT LENS GASKET

    1. E346427

      Install a new rear combination light lens gasket.

  4. INSTALL REAR TURN SIGNAL LIGHT SOCKET

  5. INSTALL REAR TURN SIGNAL LIGHT BULB

    1. Install the rear turn signal light bulb to the rear turn signal light socket.

    2. E346428

      Turn the rear turn signal light socket with the rear turn signal light bulb as shown in the illustration to install them as a unit.

  6. INSTALL TAIL AND STOP LIGHT SOCKET (for Bulb Type)

  7. INSTALL TAIL AND STOP LIGHT BULB (for Bulb Type)

    1. Install the tail and stop light bulb to the tail and stop light socket.

    2. E346462

      Turn the tail and stop light socket with the tail and stop light bulb as shown in the illustration to install them as a unit.