PRE-CRASH SAFETY SYSTEM WARNING BUZZER INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. INSTALL SKID CONTROL BUZZER (PRE-CRASH SAFETY SYSTEM WARNING BUZZER)

    1. Connect the connector.

    2. Attach the clamp to install the skid control buzzer (pre-crash safety system warning buzzer).

  2. INSTALL STEREO OPENING COVER (w/o Audio)

    Click here

  3. INSTALL RADIO RECEIVER ASSEMBLY (w/ Audio, for Radio Receiver Type)

    Click here

  4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Audio, for Radio and Display Type)

    Click here

  5. INSTALL NAVIGATION RECEIVER (w/ Navigation System)

    Click here

  6. INSTALL TELLTALE LIGHT ASSEMBLY

    Click here

  7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  8. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  9. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick here