TIRE PRESSURE WARNING RECEIVER INSTALLATION

PROCEDURE

  1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

    1. C293241

      Connect the connector.

    2. Insert the guide and install the tire pressure warning ECU and receiver with the bolt.

      8.3 N*m

      85 kgf*cm

      73 in.*lbf

  2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

    (Click hereClick here)

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  4. REGISTRATION OF TRANSMITTER ID

    (Click here)

  5. INSPECT TIRE PRESSURE WARNING SYSTEM

    (Click here)

  6. PERFORM INITIALIZATION

    (Click here)