SEAT BELT WARNING LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE MULTI-DISPLAY

    Click here

  2. REMOVE TELLTALE LIGHT ASSEMBLY


    1. B006F89C01
      B006GBM Protective Tape
      B006DHE Remove in this Direction

      Using a thin-bladed screwdriver, push in the direction indicated by the arrow shown in the illustration to detach the claw and remove the telltale light assembly.

      Note

      When removing the telltale light assembly, make sure that no dust, etc., enters the inside of the multi-display.

      Tech Tips

      Tape the thin-bladed screwdriver tip before use.