FUEL MAIN VALVE INSTALLATION

PROCEDURE


  1. INSTALL FUEL MAIN VALVE ASSEMBLY


    1. Apply gasoline to 2 new O-rings. Then install the 2 O-rings to the fuel main valve assembly (for Low Pressure).

    2. Apply gasoline to 2 new O-rings. Then install the 2 O-rings to the fuel main valve assembly (for High Pressure).

    3. Install the 2 fuel main valve assemblies to the fuel suction plate sub-assembly (fuel filter).

      B006CN7C04
      *1 Fuel Main Valve Assembly (for Low Pressure) *2 Fuel Main Valve Assembly (for High Pressure)
      *a Identification Mark (Part Number) - -

      Note


      • When installing the O-rings, make sure they do not become pinched or cut.

      • The fuel main valve assembly (for Low Pressure) and fuel main valve assembly (for High Pressure) have identification marks (part numbers). If the parts are installed in the wrong location, the engine may stall. Therefore, make sure to install the parts in the correct location.

      Tech Tips

      A Fuel Main Valve Assembly (for Low Pressure) 23070-31***
      B Fuel Main Valve Assembly (for High Pressure) 23070-36***

    4. Install the 2 clips to the fuel suction plate sub-assembly (fuel filter).

  2. INSTALL FUEL PUMP FILTER

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here