REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY


    1. Engage the guide to temporarily install the rear combination light assembly.

    2. A004JSEE01

      Tighten the 4 nuts in the order shown in the illustration to install the rear combination light assembly.

      Torque:
      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

    3. Engage the 2 grommets to connect the rear combination light socket and wire sub-assembly.

    4. Connect the connector.

  2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH (w/ Side Marker Light)

    Click here

  3. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH (w/o Side Marker Light)


    1. Install the luggage compartment inner trim cover LH with the 5 clips.

  4. INSTALL REAR FLOOR FINISH PLATE


    1. Engage the 4 claws to install the rear floor finish plate.

    2. Install the 3 clips.

  5. INSTALL LUGGAGE COMPARTMENT FLOOR MAT