AMPLIFIER ANTENNA REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. (Click here).

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  3. REMOVE ROOF HEADLINING ASSEMBLY

    (Click hereClick here)

  4. REMOVE AMPLIFIER ANTENNA ASSEMBLY

    1. Detach the 4 clamps.

    2. Remove the nut.

      E269319
    3. B215806

      Detach the 2 claws and remove the amplifier antenna.