ELECTRIC PARKING BRAKE ACTUATOR INSPECTION

PROCEDURE


  1. INSPECT PARKING BRAKE ACTUATOR ASSEMBLY


    1. Parking brake actuator assembly LH operation inspection


      1. B008LDYC04
        *a

        Component without harness connected

        (Parking Brake Actuator Assembly LH)
        *b Lock
        *c Release

        Apply voltage to the terminals of the parking brake actuator assembly and check that it operates as specified.

        Standard Resistance (LH Side)
        Tester Connection Parking Brake Actuator Operation

        Battery positive (+) -2 (MRL+)

        Battery negative (-) -1 (MRL-)

        		 Lock

        Battery positive (+) -1 (MRL-)

        Battery negative (-) -2 (MRL+)

        		 Release

        If the result is not as specified, replace the parking brake actuator assembly LH.

    2. Parking brake actuator assembly RH operation inspection


      1. B008LDYC07
        *a

        Component without harness connected

        (Parking Brake Actuator Assembly RH)
        *b Lock
        *c Release

        Apply voltage to the terminals of the parking brake actuator assembly and check that it operates as specified.

        Standard Resistance (RH Side)
        Tester Connection Parking Brake Actuator Operation

        Battery positive (+) -2 (MRR+)

        Battery negative (-) -1 (MRR-)

        		 Lock

        Battery positive (+) -1 (MRR-)

        Battery negative (-) -2 (MRR+)

        		 Release

        If the result is not as specified, replace the parking brake actuator assembly RH.