CLUTCH PEDAL SWITCH INSPECTION

PROCEDURE

  1. INSPECT CLUTCH PEDAL SWITCH ASSEMBLY

    1. C271613C02

      *a

      7.65 to 8.35 mm (0.301 to 0.329 in.)

      *b

      ON

      *c

      OFF

      Check for continuity between the terminals when the switch is ON and OFF.

      Standard Resistance

      Switch Position

      Condition

      ON (pushed)

      Below 1 Ω

      OFF (free)

      10 kΩ or higher

      If the result is not as specified, replace the clutch pedal switch assembly.

  2. INSPECT NO. 2 CLUTCH PEDAL SWITCH ASSEMBLY

    Tip:

    Refer to Inspect Clutch Pedal Switch Assembly.