CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE

  1. REMOVE NO. 2 CYLINDER HEAD COVER

    Click hereClick here

  2. REMOVE CAMSHAFT POSITION SENSOR

    1. for Exhaust Side:

      1. A205040

        Disconnect the camshaft position sensor connector.

      2. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

        Note:

        If the camshaft position sensor has been struck or dropped, replace it.

    2. for Intake Side:

      1. A282701

        Disconnect the camshaft position sensor connector.

      2. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

        Note:

        If the camshaft position sensor has been struck or dropped, replace it.