AUTOMATIC LIGHT CONTROL SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for LHD and RHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. REMOVE NO. 1 RAIN SENSOR COVER (w/ Rain Sensor)

    1. E190004

      Using moulding remover A, detach the 3 claws and disconnect the rain sensor cover.

    2. E184784

      Detach the 2 claws and remove the rain sensor cover.

  2. REMOVE NO. 2 RAIN SENSOR COVER (w/ Rain Sensor)

    1. E184783

      Using a screwdriver, detach the 2 claws and remove the No. 2 rain sensor cover.

  3. REMOVE RAIN SENSOR (w/ Rain Sensor)

    1. E184787

      Detach the 2 claws and remove the rain sensor.

      Note:

      Do not touch the silicon mixture directly with your finger.

    2. E184786

      Disconnect the connector.

      Note:

      Do not touch the silicon mixture directly with your finger.

  4. REMOVE UPPER INSTRUMENT PANEL (w/o Rain Sensor)

    (Click here)

  5. REMOVE AUTOMATIC LIGHT CONTROL SENSOR (w/o Rain Sensor)

    1. E344733

      Disconnect the connector.

    2. Detach the 2 claws and remove the automatic light control sensor.