| Battery | Standard gravity | 1.25 to 1.29 at 20°C (68°F) | ||
| Fuse | Standard resistance | Below 1 Ω | ||
| Charging circuit without load | Standard current | 10 A or less | ||
| Standard voltage | 13.2 to 14.8 V (when engine speed at 2000 rpm) |
|||
| Charging circuit with load | Standard current | 30 A or more | ||
| Battery | Standard gravity | 1.25 to 1.29 at 20°C (68°F) | ||
| Standard voltage | 1.26 to 1.28 V at 20°C (68°F) | |||
| Fuse | Standard resistance | Below 1 Ω | ||
| Charging circuit without load | Standard current | 10 A or higher | ||
| Standard voltage | 10.275 to 16.25 V (when engine speed at 2000 rpm) |
|||
| Charging circuit with load | Standard current | 30 A or higher | ||
| Generator brush holder assembly | Standard exposed length | 9.5 to 11.5 mm (0.374 to 0.453 in.) | |
| Minimum exposed length | 4.5 mm (0.177 in.) | ||
| Generator rotor assembly | Standard resistance | Slip ring - Slip ring | 2.3 to 2.7 at 20°C (68°F) |
| Slip ring - Rotor core | 10 MΩ higher | ||
| Slip ring diameter | Standard diameter | 14.2 to 14.4 mm (0.559 to 0.567 in.) | |
| Minimum diameter | 14.0 mm (0.551 in.) | ||
| Generator brush holder assembly | Standard exposed length | 9.5 to 11.5 mm (0.374 to 0.453 in.) | |
| Minimum exposed length | 4.5 mm (0.177 in.) | ||
| Generator rotor assembly | Standard resistance | Slip ring - Slip ring | 1.55 to 1.95 at 20°C (68°F) |
| Slip ring - Rotor core | 10 kΩ higher | ||
| Slip ring diameter | Standard diameter | 14.2 to 14.4 mm (0.559 to 0.567 in.) | |
| Minimum diameter | 14.0 mm (0.551 in.) | ||
| Battery thermometer sensor | Standard resistance | 1.91 to 2.05 kΩ at 24 to 26°C (75 to 79°F) | |
| Battery current sensor | Standard resistance | 2 (VC5) - 4 (E2) | 0.1 to 10 kΩ |
| 2 (VC5) - 3 (IB) | 0.5 kΩ or less | ||
| 3 (IB) - 4 (E2) | 0.05 to 10 kΩ | ||
| Battery thermometer sensor | Standard resistance | 1.5 to 2.5 kΩ | |