ECM INSTALLATION


  1. INSTALL NO. 2 ECM BRACKET


    1. A01E074

      Install the bracket with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL NO. 1 ECM BRACKET


    1. A01E18K

      Install the bracket with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  3. INSTALL ECM


    1. A01DXDD

      Install the ECM with the bolt and 2 nuts.

      Torque:
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

    2. Connect the 4 connectors.

  4. INSTALL 4WD CONTROL ECU (for 4WD)


    1. A01DWCE

      Install the 4WD control ECU with the bolt.

      Torque:
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

    2. Connect the connector.

  5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    A01E050E01
    Text in Illustration
    *1 Hinge

    1. Attach the 2 hinges to install the glove compartment door.

    2. A01E1H5E01
      Text in Illustration
      *1 Stopper

      While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  7. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.