ENGINE UNIT COMPONENTS
ILLUSTRATION
*1 |
FUEL DELIVERY PIPE |
*2 |
ENGINE WATER PUMP ASSEMBLY |
*3 |
WATER PUMP GASKET |
*4 |
WATER HOUSING COVER GASKET |
*5 |
ENGINE WATER HOUSING COVER |
*6 |
EXHAUST MANIFOLD TO HEAD GASKET |
*7 |
EXHAUST MANIFOLD |
- |
- |
 |
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*1 |
OIL FILLER CAP SUB-ASSEMBLY |
*2 |
CYLINDER HEAD COVER SUB-ASSEMBLY |
*3 |
CYLINDER HEAD COVER GASKET |
*4 |
SPARK PLUG |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*1 |
NO. 1 WATER BY-PASS PIPE |
*2 |
CYLINDER BLOCK COVER |
*3 |
CYLINDER BLOCK COVER GASKET |
*4 |
CRANKSHAFT PULLEY HUB OIL SEAL |
*5 |
CRANKSHAFT PULLEY |
*6 |
SPEED SENSOR |
*7 |
ENGINE SPEED SENSOR PROTECTOR |
*8 |
GASKET |
*9 |
ENGINE OIL PRESSURE SWITCH ASSEMBLY |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*A |
w/o Air Conditioning System |
*B |
w/ Air Conditioning System |
*1 |
KNOCK CONTROL SENSOR |
*2 |
ENGINE COOLANT TEMPERATURE SENSOR |
*3 |
O-RING |
*4 |
REAR CYLINDER BLOCK COVER |
*5 |
FLYWHEEL SUB-ASSEMBLY |
*6 |
NO. 1 FLYWHEEL SPACER |
*7 |
GENERATOR PULLEY ROLLER PROTECTION |
*8 |
V-RIBBED BELT TENSIONER ASSEMBLY |
*9 |
GENERATOR BRACKET |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
*T1 |
1st: 8.0 (82, 71 in.*lbf) 2nd: 30 (306, 22) 3rd: Turn 90° |
- |
- |
ILLUSTRATION
*1 |
CAMSHAFT TIMING GEAR ASSEMBLY |
*2 |
CAMSHAFT TIMING EXHAUST GEAR ASSEMBLY |
*3 |
TIMING BELT |
*4 |
TIMING BELT TENSIONER ASSEMBLY |
*5 |
CRANKSHAFT PULLEY HUB |
*6 |
CRANKSHAFT TIMING PULLEY |
*7 |
NO. 1 TIMING BELT IDLER SUB-ASSEMBLY |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |
*T1 |
1st: 20 (204, 15) 2nd: Turn 120° |
*T2 |
1st: 50 (510, 37) 2nd: Turn 180° |
ILLUSTRATION
*1 |
OIL PUMP DRIVE GEAR |
*2 |
OIL PUMP CHAIN |
*3 |
OIL PUMP ASSEMBLY |
*4 |
O-RING |
*5 |
ENGINE OIL LEVEL DIPSTICK GUIDE |
*6 |
NO. 1 OIL PAN BAFFLE PLATE |
*7 |
OIL PAN SUB-ASSEMBLY |
*8 |
OIL FILTER UNION |
*9 |
OIL FILTER SUB-ASSEMBLY |
*10 |
NO. 2 OIL PAN SUB-ASSEMBLY |
*11 |
OIL PAN DRAIN PLUG GASKET |
*12 |
OIL PAN DRAIN PLUG |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*1 |
NO. 1 CAMSHAFT BEARING CAP |
*2 |
NO. 2 CAMSHAFT BEARING CAP |
*3 |
CAMSHAFT |
*4 |
NO. 2 CAMSHAFT |
*5 |
CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
*6 |
CAM POSITION SENSOR |
*7 |
CYLINDER HEAD SUB-ASSEMBLY |
*8 |
CYLINDER HEAD GASKET |
*9 |
CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
*10 |
CAM POSITION SENSOR |
*11 |
WASHER |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
*T1 |
1st: 5 (51, 44 in.*lbf) 2nd: 10 (102, 7) |
*T2 |
1st: 10 (102, 7) 2nd: 20 (204, 15) |
*T3 |
1st: 10 (102, 7) 2nd: 30 (306, 22) 3rd: Turn 180° |
*T4 |
1st: 10 (102, 7) 2nd: 30 (306, 22) 3rd: Turn 230° |