CAMSHAFT OIL CONTROL VALVE ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

    1. Connect the GTS to the DLC3.

    2. Turn the GTS on.

    3. Put the engine in inspection mode (maintenance mode).

      Click here

    4. Start the engine.

    5. Warm up the engine.

    6. Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Linear (Bank1).

      Powertrain > Engine and ECT > Active Test

      Tester Display

      Control the VVT Linear (Bank1)

    7. Check the engine speed while operating the Oil Control Valve (OCV) using the GTS.

      Standard Condition

      Control Range

      Specified Condition

      0%

      Normal engine speed

      100%

      Soon after OCV switched from OFF to ON, engine idles roughly or stalls

      If the operation is not as specified, check the camshaft timing oil control valve assembly, wire harness and ECM.