TIRE PRESSURE WARNING RESET SWITCH(for RHD) INSPECTION

PROCEDURE


  1. INSPECT TIRE PRESSURE WARNING RESET SWITCH


    1. A005D8UE01
      Text in Illustration
      *a

      Component without harness connected

      (Tire Pressure Warning Reset Switch)
      *b ON
      *c OFF

      Remove the tire pressure warning reset switch Click here.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (INT) - 2 (E) ON Below 1 Ω
      OFF 10 kΩ or higher