INSTRUMENT PANEL SPEAKER REMOVAL

PROCEDURE

1. PRECAUTION (for Driver Side)

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

2. REMOVE DECK BOARD ASSEMBLY (for Driver Side)

   Click here

3. REMOVE NO. 1 DECK BOARD (for Driver Side)

   Click here

4. REMOVE NO. 2 DECK BOARD (for Driver Side)

   Click here

5. REMOVE REAR DECK FLOOR BOX (for Driver Side)

   Click here

6. REMOVE DECK FLOOR BOX RH (for Driver Side)

   Click here

7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL (for Driver Side)

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

8. REMOVE INTEGRATION CONTROL AND PANEL (for Driver Side)

   Click here

9. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL (for Driver Side)

   Click here

10. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for Driver Side)

    Click here

11. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Driver Side)

    Click here

12. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (for Driver Side)

    Click here

13. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP (for Driver Side)

    Click here

14. REMOVE FRONT PILLAR GARNISH (for Driver Side)

    Click here

15. REMOVE LOWER FRONT PILLAR GARNISH (for Driver Side)

    Click here

16. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for Driver Side)

    Click here

17. REMOVE INSTRUMENT PANEL BOX ASSEMBLY (for Front Passenger Side)

    Click here

18. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY (for Front Passenger Side)

    Click here

19. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP (for Front Passenger Side)

    Tech Tips

    Use the same procedure for the RH side and LH side.

20. REMOVE FRONT PILLAR GARNISH (for Front Passenger Side)

    Tech Tips

    Use the same procedure for the RH side and LH side.

21. REMOVE LOWER FRONT PILLAR GARNISH (for Front Passenger Side)

    Click here

22. REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for Front Passenger Side)

    Click here

23. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY

    
    

    1. 

       Remove the 2 bolts.

    2. Lift the front No. 2 speaker assembly and disconnect the connector to remove the speaker.

       Note

       Do not touch the cone part of the speaker.

       Tech Tips

       Use the same procedure for the RH side and LH side.