DOOR CONTROL SWITCH INSPECTION

PROCEDURE


  1. INSPECT MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. Check that the LED illuminates.


      1. A001X40C02
        *a

        Component without harness connected

        (Multiplex Network Master Switch Assembly)
        *b LED Illumination

        Battery voltage to the multiplex network master switch assembly and check that the LED illuminates.

        OK
        Battery Connection Specified Condition

        Battery positive (+) → 3 (ILL+)

        Battery negative (-) → 13 (ILL-)

        		 LED illuminates

        If the result is not as specified, replace the multiplex network master switch assembly.