REAR DOOR WINDOW FRAME MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE

  1. REMOVE REAR DOOR BELT MOULDING ASSEMBLY

    for Hatchback, Wagon:Click here

    for Sedan:Click here

  2. REMOVE REAR DOOR FRONT WINDOW FRAME MOULDING

    Tip:

    When removing the rear door front window frame moulding, heat the vehicle body and rear door front window frame moulding using a heat light.

    Table 1. Heating Temperature

    Item

    Temperature

    Vehicle Body

    40 to 60°C (104 to 140°F)

    Rear Door Front Window Frame Moulding

    20 to 30°C (68 to 86°F)
    Note:

    Do not heat the vehicle body or moulding excessively.

    1. Using a heat light, heat the rear door front window frame moulding.

    2. B329292C02
      V100155

      Double-sided Tape

      Using a moulding remover, disengage the clip and guide, and peel off the double-sided tape to remove the rear door front window frame moulding.