SHIFT LEVER(for TMMT Made) DISASSEMBLY

PROCEDURE

  1. REMOVE LOWER POSITION INDICATOR HOUSING

    1. C327254

      Disengage the 5 claws to remove the lower position indicator housing from the shift lock control unit assembly.

      Note:

      Do not damage the lower position indicator housing.

  2. REMOVE SHIFT LOCK CONTROL ECU (w/o Smart Entry and Start System)

    1. C327261

      Disconnect the shift lock solenoid connector.

    2. C272813

      Disengage the 2 claws to remove the shift lock control ECU from the shift lock control unit assembly.