FUEL PUMP REASSEMBLY

PROCEDURE


  1. INSTALL FUEL PUMP WITH FILTER ASSEMBLY


    1. A005DNAE13
      Text in Illustration
      *1 O-ring
      *2 Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump with filter assembly.

    2. B005Y7Y

      Connect the fuel pump harness connector.

    3. B005YUO

      Engage the 5 claws of the fuel pump with filter assembly.

      Note


      • Make sure that the O-ring is not cut or pinched during the installation.

      • Engage the claws securely.

      • Do not remove the fuel filter.

    4. A005DT5

      Engage the 2 claws of the No. 1 fuel suction support.

    5. A005EDR

      Engage the 2 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.

    6. A005DQ1

      Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.

      Note

      Do not apply excessive force to the fuel tube or the suction support.

    7. B005XFR

      Connect the connector of the fuel pump harness.

  2. INSTALL FUEL SENDER GAUGE ASSEMBLY

    Click here