WIPER SWITCH REMOVAL

Tech Tips


  • Use the same procedures for the RH and LH side.

  • The procedures listed below are for the LH side.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE STEERING COLUMN UPPER COVER

    A01E07KE01

    1. Remove the 3 screws and cover lower.

  3. REMOVE STEERING COLUMN LOWER COVER

    A01E07KE01

    1. Remove the 3 screws and cover lower.

  4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01DYXB

      Disconnect the connectors.

    2. Detach the claw and remove the windshield wiper switch.

      Note

      Do not push the claw with excessive force as damage may occur.