DRIVE SHAFT SYSTEM


  1. OUTLINE


    1. Front Drive Shaft


      1. A tripod type Constant-Velocity Joint (CVJ) is used on the front differential side, and a Rzeppa type CVJ is used on the front axle side.

      2. A dynamic damper is provided to reduce vibration and noise.

        A01VDHVC01
        *1 Rzeppa Type CVJ *2 Tripod Type CVJ
        *3 Dynamic Damper - -
        *a LH Side *b RH Side
        B00208D Front Axle Side B00209S Front Differential Side

    2. Rear Drive Shaft (4WD/AWD Models)


      1. An offset type CVJ is used on the rear differential side, and a Rzeppa type CVJ is used on the rear axle side. Both the right and left have the same length to ensure straightline stability.

        A01VDFIC01
        *1 Offset Type CVJ *2 Rzeppa Type CVJ
        B00208D Rear Differential Side B00209S Rear Axle Side