ECM REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    A01DY2GE01
    Text in Illustration
    *1 Stopper

    1. Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    2. A01DZ7ME01
      Text in Illustration
      *1 Hinge

      Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.

  3. REMOVE 4WD CONTROL ECU (for 4WD)


    1. A01DWCE

      Disconnect the connector.

    2. Remove the bolt and 4WD control ECU.

  4. REMOVE ECM


    1. A01DXDD

      Disconnect the 4 connectors.

    2. Remove the bolt, 2 nuts and ECM.

  5. REMOVE NO. 1 ECM BRACKET


    1. A01E18K

      Remove the 2 screws and bracket.

  6. REMOVE NO. 2 ECM BRACKET


    1. A01E074

      Remove the 2 screws and bracket.